Race on 29 y 30 June 2019

8. MOTOR:
The motor will be delivered by the organization.
MNUFACTURER: Slot-it
MODEL: Flat
Ref.: mn09ch
This is mandatory motor for all three categories, mounted with the open part down.

8.1. It will be of strict series without any modification should respect without modification the components that
were originally supplied in each engine: Box, Armature, Head, Springs, Support of the coals, clips, magnets,
coals, screws and bearings.

8.2. It must be sealed and any mark of possible manipulation will lead to disqualification. Prohibited to e liminate
the label. In its closed track position for LMPs and open for GTs.

8.3. No electrical, mechanical or electronic element that alters the performance of the motor can be added or
manipulated.

8.4. The use of original magnetic field enhancers is prohibited.
8.5. The engine can be fixed by the original fastening system or assisted by glue and / or adhesive tape to the
chassis, without excess, although this always has to also hold the motor support.

9. WEIGHTS AND MEASURES
9.1. An increase in body weight is allowed due to decoration.
9.2. The minimum weight of the body is 16.0 gr.
9.3. At the start of the race, the minimum distance from the engine to the ground will be 1mm. If a car scratches
the track due to lack of tires, the race directors may force the change of tires, in the case of track shorts.

9.4. The front wheels are not forced to touch the verification plate, but if they rotate freely on their axis .
9.5. Throughout the race all the measures can be verified by the race director at any time at the request or claim
of any driver or decision of the race director himself. If it is found incorrect, the team must stop in the pits
to solve the error.

12
Revision v.2.7 EN (2019/01/14)