REG. TEC. e CSD 2019 3.0 EN.pdf

Vista previa de texto
Race on 29 y 30 June 2019
2.5. The cars must keep all the elements and characteristics in dimensions of the original models. The body must
cover all the mechanical elements: motor, transmission, cables and guide, in its vertical view, or through the
glass or headlights.
2.6. It is possible to remove or add antennas, wiper blades and rear-view mirrors (if they come separately from
the body). It will be obligatory to assemble the original slot-it lighting kit without modifications or extra led,
race will NEVER run in total darkness. The cable to the LEDs will be of free choice.
2.7. Vehicle base colour can be of any chose, but the body must be painted. No out from the kit box bodies will
be allowed, even if they meet the minimum weight.
2.8. The cockpit is part of the body for weight purposes. Its function will be to separate the body of the chassis so
that it does not allow the view of mechanical elements of the car. Inside, driver body must be placed logically.
The decoration is free. The body window panels must be the car originals. The cockpit should be minimally
decorated, identifying at least the pilot.
2.8.1. The three-dimensional pilot must be seen from the front and the side of the car when placed on track i
driving position. It is obligatory to paint.
2.8.2. Lexan cockpit is allowed when it is used the original created for the chosen car model.
2.8.3. The use of homemade cockpit is forbidden, it must be from any recognized slot manufacturer and
manufactured for that particular car model.
2.8.4. It is possible to flatten the lexan slightly to avoid its contact with the chip capacitor and to facilitate the
tilting. If this action is exaggerated or a severe deformation of the lexan is visualized, it will be forced to
return it to its original position or if it were not possible to replace it completely.
2.9. The body optics/windows/etc. must be the original ones of the car in the plastic version.
2.10.
It is allowed to pierce the cockpit and the crystals for the antenna output of the chip. Without excesses.
4
Revision v3.0 EN (2019/02/03)
