Caja PDF

Comparta fácilmente sus documentos PDF con sus contactos, la web y las redes sociales.

Compartir un archivo PDF Gestor de archivos Caja de instrumento Buscar PDF Ayuda Contáctenos



Specifications CPVC Pipe .pdf


Nombre del archivo original: Specifications-CPVC_Pipe.pdf
Título: Layout 1

Este documento en formato PDF 1.3 fue generado por QuarkXPress(tm) 6.52, y fue enviado en caja-pdf.es el 21/08/2013 a las 04:34, desde la dirección IP 189.224.x.x. La página de descarga de documentos ha sido vista 856 veces.
Tamaño del archivo: 49 KB (2 páginas).
Privacidad: archivo público




Descargar el documento PDF









Vista previa del documento


Product Specifications
CPVC Industrial Pipe: Schedule 40 & 80

Product Specifications

CPVC Schedule 40 & 80 Pipe

Application:
Corrosion resistant pressure pipe, IPS sizes 1/8" through 24", for use at temperatures up to and including 200°F. Pressure rating (130 psi
to 1130 psi) varies with schedule, pipe size, and temperature as shown on page 2 of this specification, and as stated in Georg Fischer
Harvel LLC engineering bulletin (Product Bulletin 112/401). Generally resistant to most acids, bases, salts, aliphatic solutions, oxidants,
and halogens. Chemical resistance data is available and should be referenced for proper material selection. Pipe exhibits excellent flammability characteristics (ULC Listed for Surface Burning Characteristics) and other physical properties. Typical applications include:
chemical processing, plating, high purity applications, hot and cold potable water systems, water and wastewater treatment, and other
industrial applications involving hot corrosive fluid transfer.

Scope:
This specification outlines minimum manufacturing requirements for Chlorinated Polyvinyl Chloride (CPVC) schedule 40 and 80 iron
pipe size (IPS) pressure pipe. This pipe is intended for use in industrial systems where the fluid conveyed does not exceed 200°F. This
pipe meets and or exceeds the industry standards and requirements as set forth by the American Society for Testing and Materials
(ASTM) and the National Sanitation Foundation (NSF).

CPVC Materials:
The material used in the manufacture of the pipe shall be a rigid chlorinated polyvinyl chloride (CPVC) compound, Type IV Grade I,
with a Cell Classification of 23447 as defined in ASTM D1784. This compound shall be light gray in color, and shall be approved by NSF
for use with potable water.

Dimensions:
CPVC Schedule 40 and Schedule 80 pipe shall be manufactured in accordance to the requirements of ASTM F441 for physical dimensions
and tolerances. Each production run of pipe manufactured in compliance to this standard, shall also meet the test requirements for
materials, workmanship, burst pressure, flattening, and extrusion quality defined in ASTM F441. All belled-end pipe shall have tapered
sockets to create an interference-type fit, which meet or exceed the dimensional requirements, and the minimum socket length for
pressure-type sockets, as defined in ASTM D2672.

Marking:
Product marking shall meet the requirements of ASTM F 441 and shall include: the manufacturers name (or the manufacturers trademark when privately labeled); the nominal pipe size; the material designation code; the pipe schedule and pressure rating in psi for
water @ 73°F; the ASTM designation F 441; and the independent laboratory’s seal of approval for potable water usage. Marking shall also
include the flame spread rating and smoke development rating when tested and listed for surface burning characteristics per CAN/ULC
S102.2 (Flame Spread (F.S.) of <25 and Smoke Development (S.D.) of <50).

Sample Specification:
All CPVC Schedule 40 and schedule 80 pipe shall be manufactured from a Type IV, Grade I Chlorinated Polyvinyl Chloride (CPVC)
compound with a minimum Cell Classification of 23447 per ASTM D1784. The pipe shall be manufactured in strict compliance to ASTM
F441, consistently meeting the Quality Assurance test requirements of this standard with regard to material, workmanship, burst
pressure, flattening, and extrusion quality. The pipe shall be produced in the USA using domestic materials, by an ISO 9001 certified
manufacturer, and shall be stored indoors after production, at the manufacturing site, until shipped from factory. This pipe shall carry
the National Sanitation Foundation (NSF) seal of approval for potable water applications. The pipe shall have a Flame Spread rating
< 25 and a Smoke Development rating < 50 when tested and listed for Surface Burning Characteristics in accordance with
CAN/ULC-S102-2-M88 or equivalent. All pipe shall be manufactured by Georg Fischer Harvel LLC.

©2012 Georg Fischer Harvel LLC • 300 Kuebler Road, Easton, PA 18040 • 610-252-7355 • Fax: 610-253-4436 • Harvel.com

Product Specifications
CPVC Industrial Pipe: Schedule 40 & 80
Schedule 40 Dimensions
Nom. Pipe
Size (in.)

0.540
0.675
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
8.625
10.750
12.750
14.000
16.000
18.000
20.000
24.000

Nom.
Wt./Ft.

Max.
W.P

0.344
0.473
0.602
0.804
1.029
1.360
1.590
2.047
2.445
3.042
3.521
3.998
5.016
6.031
7.942
9.976
11.889
13.073
14.940
16.809
18.743
22.544

0.088
0.091
0.109
0.113
0.133
0.140
0.145
0.154
0.203
0.216
0.226
0.237
0.258
0.280
0.322
0.365
0.406
0.437
0.500
0.562
0.593
0.687

0.096
0.128
0.190
0.253
0.371
0.502
0.599
0.803
1.267
1.660
1.996
2.363
2.874
4.164
6.268
8.886
11.751
13.916
18.167
22.965
29.976
37.539

Average
I.D.

Min.
Wall

Nom.
Wt./Ft.

Max.
W.P.

0.282
0.403
0.526
0.722
0.936
1.255
1.476
1.913
2.290
2.864
3.326
3.786
4.768
5.709
7.565
9.493
11.294
12.410
14.213
16.014
17.814
21.418

0.119
0.126
0.147
0.154
0.179
0.191
0.200
0.218
0.276
0.300
0.318
0.337
0.375
0.432
0.500
0.593
0.687
0.750
0.843
0.937
1.031
1.218

0.117
0.162
0.238
0.322
0.473
0.654
0.793
1.097
1.674
2.242
2.735
3.277
4.078
6.258
9.506
14.095
19.392
23.261
29.891
37.419
45.879
64.959

1130
920
850
690
630
520
470
400
420
370
350
320
290
280
250
230
230
220
220
220
220
210

780
620
600
480
450
370
330
280
300
260
240
220
190
180
160
140
130
130
130
130
120
120

Schedule 80 Dimensions
Nom. Pipe
Size (in.)
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
24

O.D.
0.540
0.675
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
8.625
10.750
12.750
14.000
16.000
18.000
20.000
24.000

The pressure ratings given are for water, non-shock, @ 73°F. The
following temperature de-rating factors are to be applied to the
working pressure ratings listed when operating at elevated
temperatures.

De-Rating Factor

Multiply the working pressure
rating of the selected pipe
at 73°F, by the appropriate
de-rating factor to determine
the maximum working
pressure rating of the pipe
at the elevated temperature
chosen.
EX: 10" CPVC SCH 80
@ 120°F = ?
230 psi x 0.65 =
149.5 psi max. @ 120°F

Operating
Temp (°F)

De-Rating
Factor

73-80
90
100
110
120
130
140
150
160
170
180
200

1.00
0.91
0.82
0.72
0.65
0.57
0.50
0.42
0.40
0.29
0.25
0.20

THE MAXIMUM SERVICE TEMPERATURE FOR CPVC IS 200°F.
Solvent-cemented joints should be utilized when working at or
near maximum temperatures. GF Harvel does not recommend
the use of CPVC for threaded connections at temperatures above
150°F; use flanged joints, unions, or roll grooved couplings
where disassembly is necessary at elevated temperatures.
Threading of Sch 40 CPVC pipe is not a recommended practice
due to insufficient wall thickness. Thread only Sch 80 or heavier
walls. Threading requires a 50% reduction in pressure
rating stated for plain end pipe @73°F.
Chemical resistance data should be referenced for proper
material selection and possible de-rating when working with
fluids other than water. Refer to GF Harvel 112/401 Product
Bulletin for chemical resistance and installation data.

ASTM STANDARD D1784 MATERIAL EQUIVALENTS:
Cell Classification 23447 = CPVC Type IV Grade I = CPVC 4120
PIPE SIZES SHOWN ARE MANUFACTURED IN STRICT
COMPLIANCE WITH ASTM F441

©2012 Georg Fischer Harvel LLC • 300 Kuebler Road, Easton, PA 18040 • 610-252-7355 • Fax: 610-253-4436 • Harvel.com

Product Specifications

Min.
Wall

CPVC Schedule 40 & 80 Pipe

1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
24

O.D.

Average
I.D.


Specifications-CPVC_Pipe.pdf - página 1/2
Specifications-CPVC_Pipe.pdf - página 2/2

Documentos relacionados


Documento PDF specifications cpvc pipe
Documento PDF numatics catalogo elementos filtrantes de reemplazo oem
Documento PDF numatics catalogo entrega inmediata
Documento PDF job opportunity
Documento PDF kanthal a rebon flat
Documento PDF cooking time and amount of water in pressure cooker carlos mirasierras


Palabras claves relacionadas